 
COPKO Heavy Duty Drop-Forged Steel
Hand-Operated Reinforcing Steel Bar Cutter
The whole brand new COPKO reinforcing steel bar cutter is made of Drop-Forged steel. This cutter is the most suitable for construction industrial use.
COPKO BAR CUTTER
Outstanding quality features:
- The body, gear lever and gear body of the bar cutter are made of high carbon steel and formed by "Forging".
- The COPKO bar cutter is equipped with a particularly sturdy gear lever transmission transmitting the force directly to the shear part.
- For keeping the path of the hand lever as short as possible when cutting thin as well as thick reinforcing bars and for reducing the power requirements, the shearing jaw clearance of the T50N Series are adjustable. The lever located on the left hand side of the bar cutter is for setting the shearing jaw clearance to the thickness to be cut.
- The hand lever of the bar cutter T50N Series, in basic position, is secured by a retaining spring to prevent accidental falling down.
- The bar cutter 50N Series are equipped with high quality blade from Bohler, Germany. The blade has two cutting edges. The steel quality of the blade is such that any kind of reinforcing bars can be cut.
Model |
|
Bar Cutter
T50N/28 |
Bar Cutter
T50N/32 |
Tensile Strength |
45 kp/mm2 |
45 kp/mm2 |
45 kp/mm2 |
65,000 p.s.i. |
65,000 p.s.i. |
65,000 p.s.i. |
| Round |
22 mm. |
28 mm. |
32 mm. |
7/8 inch |
1 3/32 inch |
1 1/4 inch |
| Square |
20 mm. |
24 mm. |
|
25/32 inch |
15/16 inch |
1 inch |
| Flat |
35 x 10 mm. |
|
45 x 16 mm. |
1 3/8 x 3/8 inch |
1 9/16 x 5/8 inch |
1 3/4 x 5/8 inch |
| Size of blade |
Length 35 mm. |
Length 45 mm. |
Length 50 mm. |
Thickness 10 mm. |
Thickness 15 mm. |
Thickness 15 mm. |
| Approx. weight |
13 kgs. |
29 kgs. |
39 kgs. |
    
Back to top |
