Atlas Copco Pneumatic breakers

Description

Atlas Copco Pneumatic breakers

A trusted power source with less vibration than the competition thanks to more than 110 years of refinement

 

Atlas Copco Pneumatic breakers
Atlas Copco Pneumatic breakers

50%

less air consumption. RTEX is so clever it can cut your air consumption by half. Get a smaller compressor or run two on one. Either way you save money.

25%

less weight, same performance. Now you can get the same job done using a 25 kg RTEX as with a 33 kg heavy breaker. That means less to transport, less to carry and a healthier back.

8hours

you can work up to. Stiff handles give you full control over the machine. And thanks to an efficient stroke mechanism with a Constant Pressure Chamber, vibration levels are below 5 m/s².

Solid Body concept 

The one-piece machine body means fewer parts. This will help to increase reliability. The concept also gives a low centre of gravity to our breakers and thus a good balance of the product. 

HAPS™ system
By reducing the in-use vibration value of the machine, our HAPS™ system helps to decrease the negative effects of harmful
vibration at a given trigger time.

Highly efficient silencer
The wear-resistant polyurethane silencer cuts the noise emission by up to 75% (as compared to the same machine without
noise reduction, ISO 2000/14/EC).

SOFSTART™ trigger
The two-step trigger gives the operator full control when starting a cut – even under difficult conditions. Available with selected tools only.

Air cushioned piston
To reduce vibration and wear, the piston turns on air-cushions at either end of the cylinder. When working off-load, this practically eliminates metal-to-metal contact.

Rotating air inlet swivel
Easy handling of the tool, even when pressurized. Available with selected tools only.

Integrated lubricator
Helps to minimize tool wear and is excellent for cold conditions, when it can be used for anti-freeze, such as our Breaker and Hammer AIR-OIL. It holds enough lubricant for an entire shift of normal work. Available with selected tools only.

Handheld pneumatic tools

A workman with an Atlas Copco machine will never have to blame his tools. Our pneumatic breakers and hammers are designed to get more work done in a day. HAPS™ technology dampens vibrations and the tool’s single casting design means fewer parts, less fuss. Try an Atlas Copco pneumatic breaker or hammer and you’ll feel the difference: our well-balanced pneumatic tools offer excellent ergonomics.

Light pneumatic breakers
Applications:
• Light breakers for service jobs and general demolition
Features:
• Solid Body concept
• Noise-reduction
• HAPS™ Hand and Arm Protection System (PE series)
• SOFSTART™ two-step trigger
• Rotating air inlet swivel
• Integrated lubricator
• Air cushioned piston

Medium pneumatic breakers
Applications:
• Medium breakers for service jobs and general demolition
• TEX P60: asphalt and other medium hard materials
Features:
• Solid Body concept
• Noise-reduction
• HAPS™ Hand and Arm Protection System (PE series)
• SOFSTART™ two-step trigger
• Rotating air inlet swivel
• Integrated lubricator
• Air cushioned piston

Heavy pneumatic breakers
Applications:
• Heavy-duty demolition breakers for use in medium and hard materials such as asphalt and reinforced concrete
Features:
• Noise-reduction
• HAPS™ Hand and Arm Protection System (PE series)
• Rotating air inlet swivel
• Integrated lubricator
• Air cushioned piston

Atlas Copco Pneumatic breakers
Atlas Copco Pneumatic breakers
Atlas Copco Pneumatic breakers
Atlas Copco Pneumatic breakers

Technical specifications

Pneumatic BreakersRTEXRTEX
Weightkg2525
Lengthmm780/685*780
Air consumptionl/s17.518.5
Impact ratebpm845870
Vibration level 3 axes (ISO 28927-10)m/s254.8
Sound power level guaranteed (2000/14/EC)Lw, dB(A)107107
Sound pressure level (ISO 11203)Lp, r=1m9090
Shank size Hexmm28×152/28 x 160/28 notch32x 152/32×160
Part number 8461 0125 208461 0125 30
*notched chisel